Reverse cycle air conditioning in Brunswick is mostly bought for winter. Peak Air Conditioning Brunswick installs reverse cycle split, multi-head and ducted systems that work as heat pumps, drawing warmth from the outside air on cold Melbourne mornings and running in reverse to cool the house in summer. Many jobs replace an ageing gas wall heater or gas ducted unit in a Victorian terrace, workers' cottage, interwar home or apartment across Merri-bek, so the household can move to all-electric heating. Each system is sized for its heating load first, because a draughty terrace with high ceilings needs more heat than its floor area suggests. Refrigerant work is carried out under an ARC refrigerant handling licence, and old gas appliances are disconnected by a licensed gasfitter. Call for a written quote after inspection, with bookings from 6am to 10pm, seven days.
GET A FREE QUOTE
12
Heating and cooling services
13
Brunswick and nearby suburbs covered
Free
Written quote before work starts
7 days
Open 6am to 10pm
Peak Air Conditioning Brunswick
Reverse cycle is a mode of operation rather than a type of unit, so the same heat pump principle comes in three formats. The right format depends on how many rooms need heating and where the equipment can be hidden.
A reverse cycle split heats one room from a single wall-mounted head, which makes it the usual swap for a gas wall heater in a lounge or main bedroom. It is the lowest-cost way into heat pump heating, and the fitting details are covered under split system installation.
A reverse cycle ducted system heats every room through ceiling vents from one indoor unit in the roof space or subfloor. Because warm air is delivered from above, the installer runs the fan and vent layout so heat reaches the floor rather than sitting at the ceiling. Layout and zoning options are set out under ducted air conditioning.
A multi-head system runs two to four indoor heads in heating mode from one outdoor unit. It suits a terrace where only the living room and two bedrooms are heated through winter, and where the side path has room for just one condenser. Each head has its own controls, so bedrooms can be held cooler overnight while the lounge is warmed for the evening.


Peak Air Conditioning Brunswick
In heating mode a reverse valve flips the refrigerant flow, so the outdoor coil collects heat from the air outside and the indoor coil releases it into the room.
A heat pump moves heat rather than making it, so it delivers several units of warmth for each unit of electricity it uses. A panel or fan heater, by comparison, turns one unit of electricity into one unit of heat. The heating star rating on the energy label shows how efficient a given model is, and inverter compressors ramp up and down instead of switching fully on and off.
Heat output falls as the outside air gets colder, which is why the morning warm-up is the hardest job a reverse cycle unit does. Choosing a model by its rated heating capacity, not its cooling figure, keeps the room warm before work. A timer or app that starts the unit before the household wakes also avoids a slow, full-power warm-up.
On cold, damp mornings ice can form on the outdoor coil. The unit then pauses heating for a few minutes, reverses briefly to melt the ice and may release a puff of steam outside. This is normal, and the outdoor unit is placed so the melt water drains away rather than freezing on a path.
Peak Air Conditioning Brunswick
Swapping gas heating for reverse cycle is one of the most common reasons Brunswick households call for a quote, and the change involves more than fitting a new unit.
Once heating moves to reverse cycle, the remaining gas appliances are usually just a hot water service and a cooktop. If those are also replaced, the gas meter can be removed and the daily gas supply charge disappears from the bills. Rental providers also face a rule change: the Victorian Government states that when a space heater in a rental home breaks and cannot be repaired after 1 March 2027, it must be replaced with efficient reverse cycle.
The Victorian Energy Upgrades program lists household discounts of $630 to $1,610 for replacing a non-ducted gas heater with room reverse cycle. For a ducted gas heater replaced with ducted reverse cycle, the indicative discount is up to $2,520 for a 10 kW system, $4,200 for 16 kW and $5,530 for 22.4 kW. The product must be approved under the program and carry a minimum five-year warranty.
An old gas wall heater is disconnected and the gas line capped by a licensed gasfitter registered with the Building and Plumbing Commission. The heater and flue are then removed and the wall opening patched, which often frees the spot for the new indoor head.


Peak Air Conditioning Brunswick
A reverse cycle system that is fitted with only summer in mind can leave rooms cold in July, so installation is planned around heating from the first measurement.
Most models list a higher heating output than cooling output, and the heating load is usually the larger one in a Melbourne home. A Victorian terrace with solid brick walls, high ceilings, single glazing and gaps around old sash windows loses heat quickly, so its unit needs more capacity than a new apartment of the same size. The installer records ceiling height, insulation, glazing and draughts, then sizes the unit to the heating figure.
Warm air rises, so a wall-mounted head is set where its louvres can push heat down and across the room rather than straight along the ceiling. The head is kept clear of a doorway that would carry warmth into a cold hallway, and the outdoor unit is placed with clear airflow and drainage for defrost water. In a ducted system, return air is drawn from a low, central point so warm air circulates through the living areas.
Peak Air Conditioning Brunswick
Peak Air Conditioning Brunswick prices reverse cycle work from a measured heating load, so the quote matches the house rather than a catalogue size.
The technician walks each room that needs heat and notes its volume, wall type, insulation, window area and orientation, plus any open fireplace or draughty floorboards. Those readings set the heating capacity, which is then matched to a model with enough output for winter mornings. The written quote names the model, its rated heating output, the outdoor unit position and any gas disconnection or electrical work. Refrigerant work is done under an ARC refrigerant handling licence, and the manufacturer warranty applies when the system is installed to the manufacturer's requirements. Bookings run from 6am to 10pm, seven days, with same-day inspections where possible.
Where an older gas heater is still in place, the quote also states whether it is being disconnected, removed or left as a backup, and whether the job may qualify for a Victorian Energy Upgrades discount.


Peak Air Conditioning Brunswick
The figures below are indicative ranges from published cost guides, not fixed prices, and a written quote is given after inspection.
National cost guides list a simple reverse cycle split at around $1,400 to $3,000 supplied and installed, and ducted reverse cycle at around $8,000 to $15,000 (hipages, January 2026). Melbourne figures for a 5 kW split, a common size for heating a living room, run at about $1,900 to $3,675 supplied and installed (whatsthedamage.com.au, November 2026).
The Victorian Energy Upgrades program estimates bill savings of up to $460 a year when a non-ducted gas space heater is replaced with efficient reverse cycle, and up to $1,140 a year for a ducted gas heater. As a rough third-party guide built on assumed tariffs, one Melbourne estimate puts a 7-star reverse cycle split at about $0.11 to $0.22 an hour to run, against $0.22 to $0.38 for 5-star ducted gas (homeupkeep.com.au, June 2026).
Heating capacity, the number of heads or outlets, the pipe run, roof or subfloor access and any new electrical circuit all move the price. Removing an old gas heater adds gasfitting work, while an eligible Victorian Energy Upgrades discount comes off the total.
Peak Air Conditioning Brunswick
Most Brunswick homes already have some form of heating, so the real question is whether reverse cycle beats what is on the wall today.
Gas ducted heating and gas wall heaters give fast, dry heat, but they burn fuel inside or under the house and cannot cool in summer. Older units also need servicing for safe flue operation, and Victorian rental providers must have a gas safety check done every 2 years. Reverse cycle replaces both heating and cooling with one appliance, and existing gas systems can still be looked after through ducted heating service and repairs until the switch.
Portable panel, oil column and fan heaters are cheap to buy but turn each unit of electricity into only one unit of heat. That makes them costly to run for hours each evening, and a reverse cycle split in the same room uses far less power for the same warmth.
For a single bedroom, study or granny flat, a small wall-mounted reverse cycle unit, often around 2.5 kW as a rough guide, can replace a plug-in heater outright. It heats quietly overnight on a timer and cools the same room in summer.


A technician visits to look at the rooms, walls, roof space and outdoor unit position, checks the heating and cooling load, and provides a free written quote before any work starts.

The agreed work is carried out by refrigerant-licensed technicians, with pipe runs kept neat, drains fall-tested and any gas or electrical work done by licensed trades.

The system is pressure tested, commissioned and run in heating and cooling mode, then the controls, filters and manufacturer warranty requirements are explained at handover.
National cost guides put a simple reverse cycle split at around $1,400 to $3,000 supplied and installed, and ducted reverse cycle at around $8,000 to $15,000. Melbourne guides list a three-bedroom ducted system at about $8,400 to $14,700. A Victorian Energy Upgrades discount can reduce the total when a gas heater is replaced. A written quote is given after inspection.
In most cases, yes. The Victorian Energy Upgrades program estimates savings of up to $460 a year when a non-ducted gas heater is replaced with efficient reverse cycle, and up to $1,140 a year for a ducted gas heater. Actual savings depend on tariffs, insulation and how many rooms are heated. Removing gas entirely also removes the daily gas supply charge.
Yes. A heat pump keeps drawing heat from outside air through a Melbourne winter, although its output drops as the air gets colder. On frosty mornings the unit runs short defrost cycles, which is normal. Sizing the system to its rated heating capacity and starting it on a timer keeps rooms warm through cold mornings.
Size is set by the heating load, not just floor area. High ceilings, brick walls with no insulation, single glazing and draughts all push the required kW up, which is common in Brunswick terraces. As a rough guide, small bedrooms often suit about 2.5 kW and living areas 5 kW or more. Peak Air Conditioning Brunswick measures each room before recommending a size.
Yes, the Victorian Energy Upgrades program offers discounts for eligible households. It lists $630 to $1,610 for replacing a non-ducted gas heater with room reverse cycle, and up to $5,530 when removing or replacing a ducted gas heater. The new product must be approved under the program and carry a minimum five-year warranty. Eligibility is checked before the quote is finalised.
A split system describes the hardware layout: an indoor unit and an outdoor unit joined by refrigerant pipes. Reverse cycle describes what it does: it can run backwards to heat as well as cool. Most split systems sold today are reverse cycle, and ducted and multi-head systems can be reverse cycle too. Cooling-only models are the exception.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm