Split system installation in Brunswick works one room at a time. Peak Air Conditioning Brunswick fits wall-mounted split system air conditioners, reverse cycle units and multi-head systems in terraces, workers' cottages, postwar units and new apartments across Merri-bek. Each unit is sized in kilowatts for the room it serves, then placed so the pipe run stays short, the outdoor unit runs quietly and the finish looks tidy from inside and out. Standard back-to-back installs, balcony condensers, internal-wall heads with condensate pumps and swaps for old window or box units are all handled. Supply and install or install only is available, with brands such as Daikin, Mitsubishi Electric and Fujitsu fitted to the manufacturer's requirements. Refrigerant work is carried out under an ARC refrigerant handling licence. Call for a written quote after inspection, with bookings from 6am to 10pm, seven days.
GET A FREE QUOTE
12
Heating and cooling services
13
Brunswick and nearby suburbs covered
Free
Written quote before work starts
7 days
Open 6am to 10pm
Peak Air Conditioning Brunswick
A split system has two halves: an indoor head that blows conditioned air into the room and an outdoor unit that holds the compressor. Split system air conditioner installation in Brunswick usually takes one of five forms, depending on the room, the wall and who buys the unit.
The wall-mounted head is the most common split system in Brunswick bedrooms and living rooms. It sits high on the wall, throws air across the ceiling and suits rooms where floor space is tight, such as the narrow front rooms of a terrace.
Almost every split sold today is reverse cycle, so one unit heats in winter and cools in summer by reversing the refrigerant flow. For many households it replaces an old gas wall heater, which is covered in more depth under reverse cycle air conditioning.
A multi-head system connects two or more indoor heads to one outdoor unit. It saves wall and yard space, but if the single outdoor unit fails, every room it serves loses heating and cooling at once.
A back-to-back install puts the indoor head on an outside wall with the outdoor unit directly behind it. The pipe run is only as long as the wall is thick, which makes it the quickest, cheapest and most efficient layout.
Supply and install means the unit is chosen, sized and sourced as part of the quote. Install only suits owners who have already bought a unit, provided its capacity suits the room and all the parts are in the box.


Peak Air Conditioning Brunswick
Split system size is measured in kilowatts of cooling and heating output, and the right figure depends on the room as much as the unit.
As a rough guide, a small bedroom or study usually suits 2.5 kW, a larger bedroom or small lounge 3.5 kW, a typical living room 5 kW, and an open-plan kitchen and living area 7 kW to 9 kW. These bands are a starting point only; the final kW figure comes from measuring the room on site.
A Victorian terrace room with high ceilings and little wall insulation holds more air and loses heat faster than a new apartment of the same floor area. Large west-facing windows, skylights and an uninsulated roof all push the required capacity up, while double glazing and ceiling batts bring it down.
Split systems carry the Zoned Energy Rating Label, which shows separate star ratings for heating and cooling across hot, average and cold climate zones. Compare the heating stars for the zone that covers Melbourne, because winter heating is where most running costs land. For a rebate, the Victorian Energy Upgrades program also requires an approved product with a minimum five-year warranty.
Peak Air Conditioning Brunswick
A standard single-room split system is usually fitted in one visit, in four steps from wall bracket to test run.
The installer fixes a mounting plate level to the wall, into studs or masonry, and drills the penetration with a slight downward fall to the outside. The head is placed clear of curtains and cornices, with enough room above it for air intake and filter removal.
The outdoor unit sits on a concrete or composite slab at ground level, on galvanised wall brackets, or on a roof frame where there is no yard. Rubber anti-vibration pads go under the feet, and the unit is kept clear of fences and walls so it can breathe.
Insulated copper lines, the condensate drain and the interconnecting cable run together inside the wall penetration and then through neat duct cover outside. Smaller units may run from a dedicated power point, while larger ones are hardwired by a licensed electrician with an isolating switch next to the outdoor unit.
The outdoor unit arrives with a factory refrigerant charge, so the copper lines are evacuated with a vacuum pump and held to check for leaks before the service valves are opened. Longer pipe runs need extra refrigerant added by weight, as set out by the manufacturer. The unit is then run in heating and cooling while the installer checks airflow, drainage and the remote.


Peak Air Conditioning Brunswick
Not every room has an outside wall in the right place, and Brunswick's mix of apartments and period homes produces three common problem spots.
In a Brunswick apartment, the outdoor unit usually sits on the balcony floor or on wall brackets above the balustrade line, with the drain taken to the balcony floor waste rather than dripping onto the balcony below. Victoria calls a body corporate an owners corporation, and its rules often set where condensers may go, how they look and how much noise is acceptable. Approval is easier when the request includes the unit model, its position and the pipe route.
A head on an internal wall cannot drain by gravity, so the pipes travel up through the ceiling and roof space, or down through the subfloor of a timber-floored terrace. A small condensate pump lifts the water out to a drain point. Pumps add cost, make a faint hum and need cleaning at each air conditioning service.
Old window and box units are common in Brunswick's interwar and postwar homes. The refrigerant is recovered by a licensed technician before the unit is removed, the wall or window opening is filled and made weatherproof, and the new split head goes on a wall that suits the room rather than the old hole.
Peak Air Conditioning Brunswick
Peak Air Conditioning Brunswick focuses on getting the basics of a split install right: the correct licence, the correct size and a quote that matches the job.
The Australian Refrigeration Council requires anyone who installs, commissions or decommissions split systems to hold a refrigerant handling licence, and every installer holds one. That licence covers the vacuum and charge that decide how efficiently the unit runs for years. Electrical connections are completed by a licensed electrician, so the whole install is done by the right trade.
Every quote is written after the room has been measured, and it names the unit, its kW rating, the outdoor position and any extras such as a condensate pump or old-unit removal. Installs are booked from 6am to 10pm, seven days, with same-day inspections where possible.


Peak Air Conditioning Brunswick
The figures below are indicative Melbourne ranges from published cost guides and installer calculators, not fixed prices. A written quote is given after inspection.
Melbourne cost guides put a standard back-to-back install of a unit the owner already has at around $735 to $1,575, with about $1,000 typical (whatsthedamage.com.au, November 2026). Supplied and installed, the same guide lists roughly $1,250 to $2,625 for a 2.5 kW unit and $1,900 to $3,675 for a 5 kW unit. One Melbourne installer's calculator puts a standard 3.5 kW back-to-back job at about $2,100 to $2,600 (Climate Control Solutions, July 2026).
Longer pipe runs, internal-wall positions that need a condensate pump, roof or high-wall brackets and a new electrical circuit all add to the price. The same installer adds roughly $450 where licensed electrical work is needed and about $250 to remove an old unit, while whatsthedamage.com.au lists old-unit removal and disposal at around $105 to $370.
A two-head multi-split with one outdoor unit is listed at around $4,200 to $7,900 supplied and installed in Melbourne, and a four-head system at about $7,350 to $12,600 (whatsthedamage.com.au, November 2026). Climate Control Solutions puts a two-head multi at about $4,000 to $5,200, against $4,600 to $5,800 for two separate 3.5 kW splits.
Peak Air Conditioning Brunswick
Most split systems installed in Brunswick come from a handful of brands, and the differences sit in features, support and spec rather than the basic way they work.
Daikin, Mitsubishi Electric and Fujitsu each sell full wall-mounted ranges from 2.5 kW bedroom units up to large living-area models, along with multi-head outdoor units. Their current models use inverter compressors and R32 refrigerant, and most offer Wi-Fi control as standard or as an add-on. Panasonic and Mitsubishi Heavy Industries sit in the same group, so the right pick usually comes down to the exact model's heating output, noise rating and price.
Lower-priced brands such as Kelvinator, TCL, Hisense and Haier cost less upfront and can suit a spare room or rental. Before buying, compare the spec sheet for heating output in cold weather, indoor noise in dB(A), warranty length and how easily parts can be sourced in Melbourne.
The manufacturer warranty applies when the unit is installed to the manufacturer's requirements, which usually means a refrigerant-licensed installer and correct commissioning. A unit fitted by an unlicensed person can lose that cover. Regular aircon cleaning also helps keep the indoor coil and filters within the care the manufacturer expects.


A technician visits to look at the rooms, walls, roof space and outdoor unit position, checks the heating and cooling load, and provides a free written quote before any work starts.

The agreed work is carried out by refrigerant-licensed technicians, with pipe runs kept neat, drains fall-tested and any gas or electrical work done by licensed trades.

The system is pressure tested, commissioned and run in heating and cooling mode, then the controls, filters and manufacturer warranty requirements are explained at handover.
Melbourne cost guides list a standard back-to-back install of an owner-supplied unit at around $735 to $1,575. Supplied and installed, a 2.5 kW unit is listed at about $1,250 to $2,625 and a 5 kW unit at about $1,900 to $3,675. Condensate pumps, long pipe runs, new circuits and old-unit removal add to that, and a written quote is given after inspection.
A small bedroom usually suits about 2.5 kW, a larger bedroom or lounge 3.5 kW, a living room 5 kW and an open-plan area 7 kW or more. High ceilings, poor insulation and large west-facing windows push the figure up. The installer measures the room before recommending a size, so the unit is not undersized or oversized.
Yes, install only is available for units bought elsewhere. The capacity needs to suit the room, and the box should include the indoor and outdoor units, remote and mounting plate. Pipe, cable, brackets and duct cover are usually supplied by the installer. The manufacturer warranty applies when the unit is installed to the manufacturer's requirements.
A back-to-back split on an outside wall is usually finished in a single visit. Internal-wall heads, roof brackets, long pipe runs or a new electrical circuit take longer. Multi-head systems with several indoor heads can run over more than one day. The expected timeframe is set out in the written quote before booking.
Yes. The pipes and cable run through the ceiling or under the floor to reach the outdoor unit. Because water cannot drain by gravity, a condensate pump lifts it to a drain point. Peak Air Conditioning Brunswick checks the roof space or subfloor access during the inspection before confirming the route.
In most Victorian apartments, yes. Owners corporation rules usually cover outdoor units on balconies, roofs or external walls, because they change how the building looks and can affect neighbours. Lodge the request with the unit model, position and pipe route before booking the install. Peak Air Conditioning Brunswick provides those details in the written quote.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm